Switch Stonet P106GC 4GE POE+1GE Uplink +1GE SFP Gigabit

Hardware

Interface

4*10/100/1000M POE ports (Data /Power)

1*10/100/1000M uplink RJ45 port (Data)

1*10/100/1000M SFP ports

Basic function

Follow IEEE 802.3 Ethernet and IEEE802.3u Fast Ethernet Protocol

Supports POE IEEE 802. 3af/at compliant Powered Device (PD)

Store-and-forward switching scheme

Support IEEE802.3X full duplex and Backpressure half duplex

MAC address auto-learning & auto-aging

Standards

IEEE 802.3 10BASE-T Ethernet

IEEE 802.3i 10BASE-T Ethernet

IEEE 802.3u 100BASE-TX Fast Ethernet

IEEE 802.3ab 1000BASE-T Gigabit Ethernet

IEEE 802.3af/at, Power over Ethernet

IEEE 802.3x Flow Control

Mode

Normal switch mode

Data Transfer Rate

Ethernet : 10Mbps(Half-duplex);20Mbps(Full-duplex)

Fast Ethernet :100Mbps(Half-duplex);200Mbps(Full-duplex)

Gigabit Ethernet :2000Mbps(Full-duplex)

QoS

Yes

VLAN

Yes

Switching Capacity

12G

MAC Address Table Size

2K

Jumbo Frame

2048 byte

Environment

Operation Temperature：0℃～40℃
Storage Temperature：-40℃～70℃
Operation Humidity：10%～90% RH Non-condensing
Storage Humidity：5%～90% RH Non-condensing

Power Input POE Standards

Single port maximum power 30W, whole switch maximum power 58W
Supporting over-current, over-voltage and short-circuit protection
Supporting Soft Start of High Power PD
Support sequential boot-up
Power Supply Pin:12+/36-
AC 110~240V 50/60HZ

Cabling type

1000Base-TX: Cat 5e or better UTP/STP(≤100m)

100Base-TX: Cat 5e or better UTP/STP(≤100m)

10Base-TX: Cat 5e or better UTP/STP(≤100m)

Dimensions
(L x W x H )

124mm*115mm*33mm